Author Topic: 2000s/350b head back panel dimensions  (Read 2356 times)

0 Members and 1 Guest are viewing this topic.

Offline rot gut

  • Sr. Member
  • ****
  • Posts: 135
2000s/350b head back panel dimensions
« on: January 01, 2011, 02:25:41 pm »
Can someone post the dimensions for the back panel of a 2000s/350b head?

Offline rot gut

  • Sr. Member
  • ****
  • Posts: 135
Re: 2000s/350b head back panel dimensions
« Reply #1 on: January 01, 2011, 02:43:28 pm »
nvm.

Online Jeff Troy

  • Sr. Member
  • ****
  • Posts: 147
Re: 2000s/350b head back panel dimensions
« Reply #2 on: January 03, 2011, 03:07:31 pm »
Hey, RG,

Working up a non-scale but dimensional drawing for you now. Probably will post shortly.

Warmest...
759 New Holland Ave.
Lancaster PA 17602
C: 717-917-3670
F: 717-392-1031
www.TheParkPilot.org
www.vkaVintageKarting.com

Online Jeff Troy

  • Sr. Member
  • ****
  • Posts: 147
Re: 2000s/350b head back panel dimensions
« Reply #3 on: January 03, 2011, 03:51:56 pm »
Here ya go. This should do it for you.

If you send an e-mail address, I can send you an 8.5x11-inch page. The drawing will be much easier to read.

Tap to jefftroy@aol.com.



Warmest regards...
759 New Holland Ave.
Lancaster PA 17602
C: 717-917-3670
F: 717-392-1031
www.TheParkPilot.org
www.vkaVintageKarting.com

Offline rot gut

  • Sr. Member
  • ****
  • Posts: 135
Re: 2000s/350b head back panel dimensions
« Reply #4 on: January 03, 2011, 09:50:35 pm »
email sent, thanks.

Offline warandhairstyle

  • Sr. Member
  • ****
  • Posts: 113
Re: 2000s/350b head back panel dimensions
« Reply #5 on: January 04, 2011, 09:27:27 am »
email sent also.  Thanks!
When life gives you lemons, buy amplifiers.

Offline CLD

  • Hero Member
  • *****
  • Posts: 505
  • Sunn Sorado
Re: 2000s/350b head back panel dimensions
« Reply #6 on: June 20, 2011, 08:07:51 am »
I sent one as well. Thanks in advance, Jeff.
Sunn since June 1971!
1971 Sorado, 2000S, Coliseum Bass, Coliseum Lead
1970 200S; 1974 Coliseum 880

Offline CLD

  • Hero Member
  • *****
  • Posts: 505
  • Sunn Sorado
Re: 2000s/350b head back panel dimensions
« Reply #7 on: July 19, 2011, 10:11:29 am »
Does anyone have one of these diagrams they could send me? Thank you.

My main interest is the width (top to bottom) of the thin bar across the middle. My 2000S came with a DIY replacement that is too narrow (only 1.25"). Would someone with a 2000S measure that piece for me?

There was one post with a photograph large enough to see that indicates 2.125" for this piece - is that right? I saw 1.75" somewhere else, which is why I want to be sure. Thanks.

 :?
« Last Edit: July 19, 2011, 10:18:41 am by CLD »
Sunn since June 1971!
1971 Sorado, 2000S, Coliseum Bass, Coliseum Lead
1970 200S; 1974 Coliseum 880

Offline Walt-Dogg

  • Hero Member
  • *****
  • Posts: 567
Re: 2000s/350b head back panel dimensions
« Reply #8 on: July 19, 2011, 10:25:51 pm »
That would explain the weird width of the DIY one if the previous also went by a diagram... I would go ahead and email Jeff though man, I'd trust him to get the dimensions right.
Gibson Les Paul Special
Electra X260
Squier Precision Bass MIJ
Science Hellhawk 100w
Ampeg VT-22/V-4
Science Mother
Mojotone Bluesbreaker 2x12
Mojotone British 4x12
Ampeg SVT 810

Offline CLD

  • Hero Member
  • *****
  • Posts: 505
  • Sunn Sorado
Re: 2000s/350b head back panel dimensions
« Reply #9 on: July 20, 2011, 08:52:45 am »
I e-mailed and PMd Jeff last month but didn't get any response, hence the post yesterday. He's always been super-responsive before so maybe he's been traveling or something recently.
Sunn since June 1971!
1971 Sorado, 2000S, Coliseum Bass, Coliseum Lead
1970 200S; 1974 Coliseum 880

Online Jeff Troy

  • Sr. Member
  • ****
  • Posts: 147
Re: 2000s/350b head back panel dimensions
« Reply #10 on: July 21, 2011, 08:05:23 pm »
Hi, Guys,

CLD, I thought I sent that two you and another member awhile ago.

Please send an e-mail to jefftroy@aol.com and I'll resend the diagram.

Warmest regards,
759 New Holland Ave.
Lancaster PA 17602
C: 717-917-3670
F: 717-392-1031
www.TheParkPilot.org
www.vkaVintageKarting.com

Offline CLD

  • Hero Member
  • *****
  • Posts: 505
  • Sunn Sorado
Re: 2000s/350b head back panel dimensions
« Reply #11 on: July 22, 2011, 05:12:23 am »
E-mail sent. Thanks, Jeff.
Sunn since June 1971!
1971 Sorado, 2000S, Coliseum Bass, Coliseum Lead
1970 200S; 1974 Coliseum 880

Online Jeff Troy

  • Sr. Member
  • ****
  • Posts: 147
Re: 2000s/350b head back panel dimensions
« Reply #12 on: July 24, 2011, 05:51:01 am »
Hi, Carter,

Sent dimensions yesterday. Did the attachment come through?

Warmest...
759 New Holland Ave.
Lancaster PA 17602
C: 717-917-3670
F: 717-392-1031
www.TheParkPilot.org
www.vkaVintageKarting.com

Offline CLD

  • Hero Member
  • *****
  • Posts: 505
  • Sunn Sorado
Re: 2000s/350b head back panel dimensions
« Reply #13 on: July 24, 2011, 06:29:06 pm »
Yes, they did, thanks!  :-)
Sunn since June 1971!
1971 Sorado, 2000S, Coliseum Bass, Coliseum Lead
1970 200S; 1974 Coliseum 880