Author Topic: Ohms of the spectrum 1  (Read 73 times)

0 Members and 1 Guest are viewing this topic.

Offline Wizardsleeves

  • Jr. Member
  • **
  • Posts: 2
Ohms of the spectrum 1
« on: July 18, 2017, 10:56:04 am »
Hi everyone
I bought a spectrum 1 yesterday. Loving it so far we'll see how it holds up. My question is what are the ohms the spectrum 1 puts out with one speaker and what with two?
Thank you

Offline Soundmasterg

  • Hero Member
  • *****
  • Posts: 705
Re: Ohms of the spectrum 1
« Reply #1 on: July 18, 2017, 02:18:28 pm »
With all of the Sunn amps, the output transformer has taps for 4 ohms, 8 ohms, and 16 ohms. It will have negative feedback tied to one of them inside the amp, and then one of the other ones will be connected to the back, either 8 ohms or 16 ohms, with another one connected to the extension speaker jack which is a switching jack. They utilized different transformer taps on the back of the amp from year to year, but you should be able to look at the back of the amp and see which one they were using...it was usually labeled.

I can look later when I get home and see if I have the schematic available for you. Maybe one of the others will chime in too.....

Greg